Post by hereticdave on Jun 27, 2019 13:59:17 GMT
Started work on a sump sea tarrain set for Necromunda, sort of Laketown/goblintown style with walkways and platforms:
This is on a 3'x3' board so far, need more bits to make it viable for 4'x4'. The octagonal platforms are 8"x8", the walkways are 4"x8" and the narrow walkway is 2"x8". The idea is that the thin walkway is risky, the large walkway you can safely walk two 25mm bases side by side down the middle. All bits are raised by 5mm or so to give the illusion of being above the table level and this will probably be used on a green mat to represent the sump sea itself. The tin at the top will be an open sludge pit, as per the badzone tiles rules. I've got some bits arriving from the ebay, a sprue of munitorum containers that I'm going to cut in half to use as "floating" platforms, a sector mechanicus chimney stack and plasma pipes for more LOS blocking. I'm planning on building a sort of barge that could be docked, just to break up the monotony of platforms and walkways. Painting wise the plan is to spray the whole thing brown and drybrush silver and wash dark brown.
Looking for suggestions and ideas!
This is on a 3'x3' board so far, need more bits to make it viable for 4'x4'. The octagonal platforms are 8"x8", the walkways are 4"x8" and the narrow walkway is 2"x8". The idea is that the thin walkway is risky, the large walkway you can safely walk two 25mm bases side by side down the middle. All bits are raised by 5mm or so to give the illusion of being above the table level and this will probably be used on a green mat to represent the sump sea itself. The tin at the top will be an open sludge pit, as per the badzone tiles rules. I've got some bits arriving from the ebay, a sprue of munitorum containers that I'm going to cut in half to use as "floating" platforms, a sector mechanicus chimney stack and plasma pipes for more LOS blocking. I'm planning on building a sort of barge that could be docked, just to break up the monotony of platforms and walkways. Painting wise the plan is to spray the whole thing brown and drybrush silver and wash dark brown.
Looking for suggestions and ideas!
